What is the difference between 3-axis, 4-axis and 5-axis CNC?
Numerical control machining is the manufacturing and processing of parts and products under computer control.
Application of laser cutting technology in processing special-shaped parts
Laser cutting technology primarily uses a focusing lens to focus a CO2 laser beam on the surface of a material, melting it. At the same time, compressed gas coaxial with the laser beam is applied to blow away the melted material, allowing the laser beam and the material to move relative to each other along a specific trajectory, thus forming a slit. With the advancement of science and technology, laser technology has developed rapidly.
The relationship between pressure and flow in injection molding process
Is the machine action the result of pressure or flow? What is the relationship between them?
Comparison of CNC machining and 3D printing
The main materials used in 3D printing include liquid resin (SLA), nylon powder (SLS), metal powder (SLM), and filament (FDM). Liquid resin, nylon powder, and metal powder occupy the vast majority of the industrial 3D printing market.
Die Casting Defect Series - Cold Shut
Cold shuts/cold joints are also common defects in die castings, particularly magnesium alloys, which are particularly susceptible due to their material properties.
Process Analysis — Brushed Sheet Metal
Sheet metal processing is a technical endeavor. To produce high-quality pieces you need not only excellent technique but also high-precision equipment. Among the many sheet metal processes, brushing (creating a brushed finish) is one of the most common and widely used.
Selection of injection pressure and holding pressure during injection molding
Injection pressure refers to the pressure exerted by the plunger or screw tip on the plastic melt. Its function is to overcome the flow resistance of the plastic melt from the barrel into the mold cavity, allowing the melt to fill at a certain rate and compacting the melt to compensate for shrinkage.
Die Casting Defect Series - Flash
Flash can also be called: flying material, seam, burr, flying wing, escaping material, and bulging mold.
How to solve the problem of product cracking after adding masterbatch during injection molding?
1.The problem of striped pigment bands on products under sunlight needs to be considered from two aspects:
Die Casting Defect Series - Porosity
Porosity, a common internal defect in die-castings, is a regularly shaped, smooth hole formed by trapped gas. Porosity, or pinholes, are currently one of the most significant defects in die-castings. Controlling porosity is particularly critical in areas that require sealing.